Welcome to our online store!

Log In / Register My Quote

Mortar, Grouts & Adhesives

×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Mortar, Grouts & Adhesives

Items 1 to 12 of 90 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

  • Dayton Epoxy Grout J55 System 127kg

    Dayton Epoxy Grout J55 System 127kg

    Dayton Epoxy Grout J55 is a three-part non-shrinking, low exotherm grout available in two package sizes. Epoxy Grout J55 consists of blended aggregates and pre-measured 100% solids, very low exotherm epoxy resin. When mixed, the result is a non-shrink grout that can be placed from 10mm up to 200mm deep in a single pour resulting in a 95% bearing area when properly installed. It offers high early strength and can be used for anchor bolts and sleeves, supporting pumps, mill tables, crushers, crane rails, engines, compressors, rotary equipment and other heavy machinery requiring a stable and energy absorbing base subject to dynamic loads to maintain precision alignment. Supplied as an 18.9 L bucket of component A, a 7.5 L bucket of component B, and four 27kg bags of component C. Yields 0.057 cubic metres per 127 kg package.
  • Aftek Floor Level Primer 5L

    Aftek Floor Level Primer 5L

    5L container of Aftek's universal Primer.
  • Aftek PenaFlow UW 20Kg

    Aftek PenaFlow UW 20Kg

    Aftek PenaFlow UW Grout 20Kg
  • Aftek PenaFlow LA 20Kg

    Aftek PenaFlow LA 20Kg

    Aftek PenaFlow LA Grout 20Kg
  • Dayton 1107 Advantage Grout

    Dayton 1107 Advantage Grout 22.7 kg

    Exterior grouting of structural column base plates, pump and machinery bases, anchoring bolts, dowels, bearing pads and keyway joints. It finds applications in paper mills, oil refineries, food plants, chemical plants, sewage and water treatment plants etc. Dayton 1107 can be mixed to a dry pack, flowable or fluid consistency.
  • Dayton HD25 VO Vertical Overhead Repair Mortar 20 kg | Jaybro

    Dayton HD25 VO Vertical / Overhead Repair Mortar 20 kg

    HD 25 VO is a high strength mortar containing portland cement, special polymers and accelerators to provide an accelerated strength gain and set time. HD 25 VO is a single component, fiber enhanced trowelable material formulated for vertical and overhead repairs of concrete. HD 25 VO can be used inside or outside and above or below grade in structural repairs.
  • Aftek Crete Bond 20L

    Aftek Crete Bond 20L

    Aftek Crete Bond 20 litre tub, ideal for fixing old and new concrete.
  • Aftek Crete Bond 5L

    Aftek Crete Bond 5L

    Aftek Crete Bond 5 litre tub. Versatile bonding agent for use in construction and concreting applications.
  • Aftek Penapatch Fairing Coat Mortar Off White

    Aftek Penapatch Fairing Coat Mortar Off White 20kg

    Aftek Penapatch Fairing Coat Mortar is a cementitious fairing coat for precast and off-form concrete. It is a fast setting mortar formulated for repairing damaged concrete where only a thin layer is required. It cures to an exceptionally smooth textured surface that does not reflect through subsequently applied architectural coatings. It sets quickly and provides an excellent bond to concrete.
  • Aftek Flex-Pro 50FC PU Sealant Grey 600ml

    Aftek Flex-Pro 50FC PU Sealant Grey 600ml

    Flex Pro 50FC is a one component high-performance construction joint polyurethane sealant/adhesive with high mechanical strength and excellent resistance to weathering. It is suitable for sealing and bonding a wide range of substrates, and has a short skinning time. Also available in white and black.
  • Dow Corning DOWSIL 888 Silicone Joint Sealant 600ml

    Dow Corning DOWSIL 888 Silicone Joint Sealant 600ml

    Dow Corning DOWSIL 888 Silicone Joint Sealant can be used for concrete to concrete pavement joints, road pavement and general construction joints. It is ideal for use in new construction, repair or remedial applications. 888 Silicone Joint Sealant may be used to seal joints that are not uniform in width provided the movement capability of the sealant is not exceeded. May also be used in joints with minor spalling.
  • Dayton Superior Sure Bond High Strength Epoxy Binder

    Sure Bond J58 GP Epoxy Binder 7.6L

    The primary use of the Sure Bond J58 is for bonding fresh concrete to hardened concrete. Sure Bond J58 has excellent adhesion to most construction materials. SureBond J58 may be used for anchoring bolts, dowels and reinforcing steel in concrete.

Items 1 to 12 of 90 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Follow Us