Sign In 
Aftek FirePro FR Fire Rated Acrylic Sealant White 600ml
Aftek FirePro FR Sealant, previously known as Fyreflex, is a water-based acrylic sealant suitable for use in internal and external expansion joints and for penetrations requiring a fire-resistant seal, and has a 4 hour fire rating.
FirePro FR expands when exposed to fire to form an inorganic plug in joints and voids, assisting in the prevention of fire transmission across partitions in a building. FirePro FR combines exceptional UV and water resistance with excellent flexibility, non-slump properties and ease of application, making it ideal for internal and external application.
Features:
Ideal for:
APPLICATION
Surface Preparation:
Joint substrate should be clean and free of standing water, oil/grease, concrete spatter, dirt and dust, concrete release agents, bond breakers and other chemicals or debris. Where chemicals or debris are present, these must be removed by chemical or mechanical means prior to application (consult the chemical manufacturer for correct removal process). Failure to do so will risk adhesion failure at the sealant edge/interface. Where the substrate is highly porous, such as blockwork and concrete, surfaces should be primed prior to application to avoid excessive moisture loss and subsequent weakness in the sealant.
Placement:
Cut the end of the sausage and place sausage barrel gun nozzle over the cut end. Place the sausage into the sausage barrel gun housing and screw the nozzle head onto the housing of the barrel. Install suitably sized backing rod to fit the joint width to be sealed/caulked. Gun Fyreflex into the joint space, facing the gun tip forward to ensure complete filling of the joint such that no voids are present which would weaken the strength of the joint. Finish tooling the joint within 15 minutes and wipe up excess material with a damp cloth immediately. Protect from water until suitably cured.
Typically, a joint will form a firm skin in 2 – 3 hours and take up to seven days to fully cure (dependent on joint thickness and weather conditions).
Clean Up:
Clean tools and equipment immediately after use with water. Once cured, FirePro FR must be removed by mechanical means.
Storage:12 months when stored at 20 degrees Celsius in original sealed containers.
Yield:A 600ml sausage will cover 6 metres of a 10 x 10 mm joint, and 0.5 metres of a 50 x 25 mm joint.
| CODE | 40-AFF600W |
|---|---|
| U.O.M | Each |
| Colour | White |
| Suits Substrate | Aluminium, Brick, Cement, Concrete, Fibre Cement, Glass, Plasterboard, Polystyrene, Steel, Timber |
| Box Quantity | 20 |
| Brand | Aftek |
| Size | 600 ml |
| Min Working Temp | -10 degrees Celsius |
| Max Working Temp | +80 degrees Celsius |
| Application Thickness (mm) | Max 50 x 25mm joint |
| Gel Time / Skin Time | Skins in 15 - 20 minutes (typical) |
| Cure Time | Final cure at 7 days |
| Yield | 0.5 metres of a 50 x 25 mm joint, up to 6 metres of a 10 x 10 mm joint |
| VOC Content (Volatile Organic Compounds) | Low VOC |
| Shore A Hardness | 25 - 35 |
Print Spec Sheet
