Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

6m Concrete Crash Barrier Deltabloc DB80

Code: DB80
U.O.M. - Each
The Deltabloc DB80 is an F-shape steel reinforced MASH approved concrete barrier. With the patented Deltabloc coupling system, the DB80 allows a slight tilting of the impact energy in case of a heavy impact. Elastomer bearings between the single barriers ensure controlled damping of peak loads. This guarantees reliable breakthrough prevention for heavy vehicles and soft impact behaviour for small cars. Approved for road use up to 100km/hr in NSW and VIC and 80km/hr in QLD, the Deltabloc DB80 concrete jersey barrier can reduce the risk of a head-on collision as a result of an out of control vehicle crossing over the median strip into oncoming traffic.

ADDITIONAL FREIGHT CHARGES MAY APPLY - You may be contacted about freight cost for heavy, bulky or awkward items. Call us for details on 1300 885 364.

Details

Fully approved road barrier

The DB80 Deltabloc jersey barriers are MASH Tested to TL-3, and are approved for use by Austroads on roads up to 100km/hr. Additionally, the DB80 is approved by NSW RMS, QLD Main Roads, VicRoads (up to 80km/hr) and WA Main Roads. In New Zealand, the DB80 has recently been added to NZTA Specification M23 as a CoPTTM approved temporary road safety barrier system.

MASH and NCHRP350 Tested

The Deltabloc DB80 units are demonstrated to meet the requirements of MASH test level TL-3. This means a 2270kg Ute travelling at 100km/hr impacting the barrier at an angle of 25 degrees achieves a dynamic deflection of 1.44 metres. Deltabloc technology has been optimised in more than 130 full-scale crash tests, allowing Deltabloc DB80 barriers to deliver the best impact severity results available.

Easy to transport, install and dismantle

The DB80 is characterised by a highly efficient coupling method without any screws, plus it also has patented damping devices at the element joints. As a fully approved road barrier, the Deltabloc DB80 is surprisingly lightweight at only 520kg per metre. This means it is easy and efficient to transport and install without compromising on quality or safety. The jersey shaped design keeps the barrier weighed down to allow fast truck mounted crane installation. The distinctive coupling allows for easy assembly and disassembly on site.

Options for any site

Deltabloc DB80 concrete crash barriers are available in 2 metre, 4 metre or 6 metre lengths. With the addition of accessories such as strong steel mesh fence panels and printed fence fabric, they can be transformed into a site hoarding barrier that provides safety, privacy and branding.

Features:

  • 6 metre length
  • Rated to 100km/hr in NSW and VIC and 80km/hr in QLD
  • Weighs 520kg per metre
  • Easy coupling design
  • Can be bolted or pinned in place
  • Compatible with popular crash cushions including the TAU-II and Absorb350
  • Additional Information

    CODE DB80
    10/4 - 4/10 Delivery Call To Confirm
    Brand Deltabloc
    Material Concrete
    Length 6 m
    Height 800 mm
    U.O.M Each
    Best for Major roads
    MASH Test Level TL-3
    Approvals & Certifications Austroads Approved to 100 km/hr
    NSW RMS Approved to 100 km/hr
    VicRoads Approved to 100 km/hr
    QLD Main Roads Approved to 80 km/hr
    Complies with AS/NZS 3845
    Tension Bar K150
    Module Connections Deltabloc coupling system
    Curve Radii 48 metres
    Weight When Empty 3120 kg
    Approved End Treatments and Crash Cushions TAU-II (<110km/hr)
    Absorb350 (<70km/hr)
    Tapered DB80 Ends (<70km/hr)
    Follow Us