Welcome to our online store!

Log In / Register My Quote


Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

Rocor Trade Stud Adhesive 5.2 kg Tub

Code: 40-RCSA5.2
U.O.M. - Each

More Views

Rocor Trade Stud Adhesive 5.2 kg tub. Rocor Trade Stud Adhesive is a quality adhesive that meets the requirements of AS2753-1985 for bonding plasterboard to metal internal framing or internal wooden studs. It cleans up with water.



Rocor Stud Adhesive is a quality stud adhesive specially formulated in accordance with AS2753 for bonding of plasterboard to metal internal framing or internal wooden studs (including some treated timbers i.e. H2 LOSP and H2F envelope treated timbers). It is compatible with timber and metal framing and plasterboard and achieves full cure in approximately 24 hours.


  • Meets the requirements of AS2753
  • Skins in 30 minutes
  • Attains full cure in 24 hours
  • Excellent bond strength
  • Ideal for:

  • Bonding plasterboard to timber or metal building framing
  • Suitable for pine softwood framing
  • Suitable for Hardwood framing
  • Suitable for timber framing (H1, H2, H2F)

    Surface Preparation:

    All surfaces must be clean, sound and free of dust, oil or contamination. Ensure that substrate temperature is above 5 degrees Celsius. If bonding a non-porous surface, such as metal, ensure that the other surface is capable of absorbing moisture (porous).


    Fix plasterboard as per AS2589-1983, following fixing instructions provided by the plasterboard manufacturer, including back blocking of ceilings, and temporary fixings where appropriate. In demanding conditions (e.g. garage ceilings) and in harsh climates (high humidity, temperature) adopt fixing methods designed to accommodate higher stress requirements.

    Applying Rocor Stud Adhesive stud adhesive to studs to form walnuts approximately 25mm diameter and 12mm high, ensuring adhesive is applied at least 200mm from screw or nail fasteners. Plasterboard must be fixed within 30 minutes of adhesive application and before skinning occurs. Skinning is accelerated in hot, windy, dry conditions.

    Rocor Stud Adhesive will reach 80% of its strength in approximately 24 hours. Full cure is normally achieved in 5 to 7 days, depending on walnut size, conditions and substrates.

    Clean Up:

    Clean up uncured adhesive with water. Cured material can be removed by trimming with a knife or scraper.


    Store for 18 months unopened at moderate temperatures.

    Additional Information

    CODE 40-RCSA5.2
    10/4 - 4/10 Delivery Call To Confirm
    Colour Blue
    Suits Substrate Metals, Particleboard, Plasterboard, Plywood, Polystyrene, Timber
    U.O.M Each
    Brand HB Fuller
    Size 5.2 kg
    Appearance / Composition Liquid
    Min Working Temp -5 degrees Celsius
    Max Working Temp +90 degrees Celsius
    Gel Time / Skin Time Skins in 30 minutes
    Cure Time 24 hours
    Approvals & Certifications Complies with AS2753-1985: Adhesives - mastic for bonding gypsum plaster lining to wood and metal framing members
    Follow Us