Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

Fuller Tool Box Original Grey Multi Purpose Adhesive and Sealant 400g

Code: 40-TBOG
U.O.M. - Each

More Views

Fuller Toolbox Original is a multi-purpose adhesive and sealant for use in a wide variety of adhesive and sealing applications. Its versatility means it can replace most water based and solvent based construction adhesives,
polyurethane adhesive and sealants as well as silicones. Available in white, grey or black.

Details

Tool Box Original is a moisture curing adhesive and sealant with high grab strength for use in a wide variety of adhesive and sealing applications. Toolbox cures to form a tough, waterproof seal and will adhere to a wide range of substrates. Its versatility means it can replace most water based and solvent based construction adhesives, polyurethane adhesive and sealants as well as silicones. Available in white, grey or black.

ool Box Original is suitable for Green Building applications requiring VOC of maximum 30g/lt, and meets the requirements of LEED Certification: Indoor Environmental Quality – Credit 4.1 (Low-Emitting Materials: Adhesives and Sealants). See MSDS for VOC value.

Features:

  • Permanently flexible and elastic bond
  • Rapid skinning and curing
  • High bond strength - suited to construction, marine and automotive environments
  • Primer-free adhesion to wide range of surfaces
  • Paintable with most water based paints
  • Heat resistant to 100°C
  • Solvent and isocyanate free
  • Resistant to salt and chlorinated water
  • Suitable for bonding wet non-porous substrates
  • Trafficable
  • Mould resistant
  • Ideal for:

  • Sealing gaps and expansion joints in concrete, brick, mortar, metal and stonework
  • Sealing lap joints in box guttering, airconditioning ducts and wet areas
  • Adhesive for fixing wall panels to studs, floor boards to joists
  • Use in gasket type applications in water tank flanges
  • Bonding insulation and decorative panels to solid surfaces
  • Fixing loose ceramic tiles
  • Adhering end caps to retaining walls
  • APPLICATION

    Surface Preparation:

    All surfaces must be clean, dry, sound and free of dust, oil, old sealant or other contamination. For best results wipe all surfaces with isopropyl alcohol (IPA), using a lint free cloth. Manufacturers of plastics should be consulted about suitable cleaning solvents. Adhesion to plastics should be pre-tested if in doubt. Always check the TDS for limitations of this product.

    Placement:

    Cut tip off cartridge, fit nozzle, load into caulking gun and trim nozzle to desired size.

    Adhesive - apply to one surface, press together the components. When used as an adhesive, ensure at least 2mm bond thickness is formed, do not clamp or use excessive force otherwise adhesive will be squeezed from join. Support until a strong bond is formed.

    Sealant - When used as a sealant, apply Tool Box and within 10 minutes tool off to a smooth finish using a spatula. Tool Box cures by reaction with moisture, so encapsulation between non porous surfaces will delay or suppress cure from occurring.

    Clean Up:

    Clean up uncured adhesive with mineral spirits. Cured material can be removed by trimming with a knife or scraper.

    Yield:

    400g cartridge will give approximately 15 lineal metres of a 5mm bead.

    Additional Information

    CODE 40-TBOG
    10/4 - 4/10 Delivery Yes
    Colour Grey
    Suits Substrate Aluminium, Cement, Ceramics, Fibreglass, Galvanised Iron, Glass, Plasterboard, Polystyrene, Steel, Timber
    U.O.M Each
    Box Quantity 12
    Brand HB Fuller
    Range / Model Tool Box
    Size 400 ml
    Min Working Temp -40 degrees Celsius
    Max Working Temp +100 degrees Celsius
    Gel Time / Skin Time Skins in 10 - 15 minutes at 22 degrees Celsius
    Cure Time 2 - 3 mm per day depending on conditions
    Modulus 1.6MPa (Modulus of Elasticity DIN 53504 @100%)
    Shore A Hardness 55±5
    Approvals & Certifications LEED Certification: Indoor Environmental Quality - Credit 4.1 (Low-Emitting Materials: Adhesives and Sealants)
    Suitable for Green Building applications requiring VOC of maximum 30g/lt
    Follow Us