Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Dayton Clean Strip Ultra J3 Diesel Based Form Release Agent 18 L

Code: 40-309133AU
U.O.M. - Each
Clean Strip Ultra J3 chemically releases hardened concrete from steel, aluminium, plywood, and composition forms. In conjunction with good concrete placement and forming technique, this quality product promotes easy stripping and minimizes form clean up. It is non-staining and reduces the number of surface air voids (bug holes) on regular and super plasticised concrete.
DOWNLOAD TDS

Details

Clean Strip Ultra J3 is a premium, low odour form release that is VOC compliant. It is ideal for architectural and precast concrete and for general forming applications. Clean Strip Ultra J3 works to ensure clean, positive release of plywood, fiberglass, aluminum, steel and other concrete forming materials. Clean Strip Ultra J3 prolongs the life of plywood forms, and acts to reduce rusting of steel forms.

Properly applied, Clean Strip Ultra J3 is non-staining, reduces the number of surface air voids (bugholes) and will not interfere with the adhesion of subsequent coatings.

Features:

  • Extended form life
  • Reduced labour normally used to clean forms
  • Minimizes concrete surface dusting
  • Helps prevent rusting of steel forms
  • Compatible with most form liners
  • Low odor Clean Strip Ultra J3 is suitable for use on all forms except expanded polystyrene
  • Ideal for:

  • Chemically releasing hardened concrete from steel, aluminum, plywood, and composition forms
  • Promoting easy stripping
  • Minimising form clean up
  • APPLICATION

    Surface Preparation:

    Surfaces to be treated should be clean and free of water, dust and dirt or residues that might transfer to the final concrete surface.

    Placement:

    Apply during dry weather with low pressure spray, roller or brush. Apply uniformly in a thin but continuous film to assure proper coverage. For best results apply to forms before each use. Avoid applying too heavily. Wipe excessive material from forms prior to installing forms and concrete placement. Prior to coating plywood forms, apply one or two heavy brush coats to edges to ensure complete water-proofing protection.

    Clean Up:

    Clean equipment with Citrus Cleaner or other solvent degreaser.

    Storage:

    Shelf life is two years from date of manufacture.

    Yield:

    Coverage per litre:

  • Steel - 61.5 sqm
  • Aluminium 31.5 sqm
  • Medium Density Plywood 36.9 - 49.2 sqm
  • High Density Plywood 61.5 sqm
  • Rough Sawn Timber - 1st Coat 24.6 sqm, 2nd Coat 36.9 sqm
  • Additional Information

    CODE 40-309133AU
    10/4 - 4/10 Delivery Yes
    Similar Products Parchem Form Release Agent
    BASF Masterfinish 222
    U.O.M Each
    Brand Dayton
    Size 18 L
    Appearance / Composition Liquid
    VOC Content (Volatile Organic Compounds) < 250 g/L
    Approvals & Certifications Compliant with most US and Canadian VOC regulations for Concrete Form Release agents including Federal EPA, OTC, LADCO & CARB
    Follow Us