Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Fosroc Conbextra EP120 Epoxy Grout Base 11.3L

Code: 40-FC522333-11.3L
U.O.M. - Each
Conbextra EP120 epoxy grout is a high performance 2 part epoxy grout for dynamic/repetitive load applications suitable for large volume pours. It is ideal for use in situations where heavy dynamic or mobile loads are encountered. It is especially suitable where long working time and/or low exotherm properties are required, for large pours or high ambient temperatures. It can also be used for grouting wide gap ranges making it a versatile product for a number of applications. Note this product should be used in conjunction with EP120 Hardener, part number 40-FC522444-2.7L

Details

A high performance two part epoxy grout for dynamic/repetitive load applications suitable for large volume pours. Conbextra EP120 is especially suitable where long working time and/or low exotherm properties are required e.g. for large pours or high ambient temperatures. It can also be used for grouting wide gap ranges making it a versatile product for a number of applications.

Features:

  • High compressive, tensile and flexural strengths
  • Resistant to repetitive dynamic loads
  • Fast, convenient installation
  • Withstands a wide range of chemicals
  • Virtually no shrinkage and hence ensures complete surface contact and bond
  • Low creep characteristics under sustained loading
  • Excellent flow properties
  • Can be used installed at high temperatures
  • Wide range of gap thicknesses are possible
  • Ideal for:

  • Reciprocating machinery
  • Testing equipment
  • Heavy crane and transporter rails
  • High speed turbines
  • Centrifuges and drop forges
  • Conditions where chemical spillage may be encountered
  • Steelworks, refineries, electroplating works and chemical plants
  • APPLICATION

    Surface Preparation:

    All surfaces must be free from oil, grease, free standing water or any loosely adherent material. Concrete surfaces should be cut back to a sound base. All dust must be removed and bolt holes or fixing pockets blown clean of any dirt or debris. All steel surfaces should be shot blasted free of rust, paint and flaky mill scale. Formwork should be constructed to be leakproof as Conbextra EP120 is a free flowing grout. Loss of grout once the material is placed, but not hardened, will result in incomplete filling of the gap. For free flow grout conditions it is essential to provide a hydrostatic head of grout.

    Mixing:

    Pour all the contents of the hardener pack into the base container. A forced-action mixer is essential. For large pours a purpose made grout mixer / pump may be used. Ensure the paddle is fully immersed in the grout whilst mixing. Do not pull the paddle up and down whilst mixing. Ensure there is no unmixed material left in the drum prior to placing the grout.

    Placement:

    The mixed grout should be poured steadily from one side only to eliminate the entrapment of air. Continuous grout flow is essential. Sufficient grout must be available prior to starting. The time taken to pour a batch should be regulated to the time taken to prepare the next batch.

    Clean Up:

    Tools and equipment should be cleaned immediately after use with Solvent 10.

    Storage:

    Shelf life of 24 months from date of manufacture if kept in a dry store in the original, unopened packaging.

    Yield:

    Conbextra EP120 14 litre 2 component pack consists of 11.3L Base and 2.7L Hardener.

    Additional Information

    CODE 40-FC522333-11.3L
    10/4 - 4/10 Delivery Yes
    U.O.M Each
    Brand Fosroc
    Range / Model Conbextra
    Size 11.3 L
    Appearance / Composition Multi-Part Mixture
    Min Working Temp Sub-zero temperatures
    Max Working Temp 55 degrees Celsius
    Application Thickness (mm) 10 to 120 mm
    Compressive Strength at 7 days (MPa) 75 (at 23 degrees Celsius)
    Compressive Strength at 28 days (MPa) 80 (at 23 degrees Celsius)
    Yield 2 component pack consists of 11.3L Base and 2.7L Hardener
    Modulus 8.4 GPa
    Follow Us