Welcome to our online store!

Log In / Register My Quote


Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Fosroc Concure A99 Curing Compound 20L

Code: 40-FC600909-20L
U.O.M. - Each
Concure A99 is a water-based acrylic curing compound that conforms to AS3799. Concure A99 is recommended for freshly laid concrete, including renders, structural and mass concrete indoors and outdoors. It is ideal for areas where other wet curing methods are difficult to maintain.


Concure A99 is a liquid acrylic emulsion membrane curing compound, which when applied to fresh concrete dries to a transparent film of high water retention enabling curing of the concrete by reducing loss of water from the concrete. It is recommended for freshly laid concrete, including renders, structural and mass concrete indoors and outdoors.


  • Water retention efficiency of 90%
  • Complies to AS3799-1998
  • Water based and environmentally friendly
  • Eliminates the need for damp hessian, sand or polythene sheeting
  • Rapid film formation
  • Will not yellow in sunlight
  • Seals concrete surfaces
  • Accepts most after trades
  • Ideal for:

  • Curing freshly laid concrete
  • Renders, structural and mass concrete
  • Use indoors or outdoors
  • Ideal for situations where wet curing is difficult to maintain

    Surface Preparation:

    Ensure the concrete surface is completely free of stains, oils, form coatings etc. to obtain good adhesion of Concure A99 and to avoid discoloration or uneven surface effects.


    Stir contents thoroughly before using.


    Spray Concure A99 evenly over the freshly laid concrete as soon as possible after final trowelling just after the disappearance of surface bleed water. If spray equipment is not available, apply with a soft brush, broom or wide nap roller as soon as the concrete surface is hard enough. Apply to vertical surfaces immediately after the formwork has been removed. Apply at an even coverage rate of not greater than 5 square metres per litre.

    Clean Up:

    Remove from tools and equipment with water immediately after use.


    Shelf life of 12 months if kept in a dry store in the original, unopened packs.


    Apply in a single coat application at a coverage rate of 5 sqm per litre. Can be applied at other coverage rates to achieve the desired water retention efficiency.

    Additional Information

    CODE 40-FC600909-20L
    4 Hour Delivery Yes
    Colour White
    U.O.M Each
    Brand Fosroc
    Range / Model Concure
    Size 20 L
    Appearance / Composition Liquid
    Cure Time 1 - 3 hours tack free
    24 hours trafficable
    Yield Coverage rate of 5 sqm/L
    Approvals & Certifications Conforms with AS3799-1998
    Follow Us