Welcome to our online store!

Log In / Register My Quote


Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Aftek Curecon AA Finishing Compound 20L

Code: 40-CCAA20
U.O.M. - Each
20L Curecon AA is a water-based, aliphatic alcohol finishing compound. It is available in 20 L, 200 L and 1000 L containers, and is ideal for reducing evaporation of water during curing and finishing operations. Note this product is not a curing compound. Refer to the rest of the Curecon range for curing products.


Curecon Double A is a water-based, aliphatic alcohol finishing compound designed for use on plastic (freshly poured and screeded) concrete. It reduces the evaporation of water during finishing operations. Curecon AA will not normally interfere with subsequent toppings, tiling, render, surface coatings etc. that are often used in industry. Note Curecon AA is NOT a curing compound - Curecon W, W30, PW, PW30, BE or A are water based curing compounds complying with AS3799.


  • Reduces evaporation of water from the concrete surface
  • Improves finishing properties in adverse weather conditions
  • Reduces shrinkage cracking through premature drying
  • Does not interfere with after trades
  • Dries clear
  • Ideal for:

  • Reducing evaporation of water during finishing operations

    Surface Preparation:

    Pre-dilute with clean water, at a rate 1 part Curecon Double A to 9 parts water by volume. Stir the mixture thoroughly prior to application.


    Curecon Double A may 'layer' when stored for extended periods of time. Stir thoroughly before use. It is recommended that mixed Curecon Double A is not stored. Mix only that amount of product likely to be needed for each application.


    Apply using a low pressure backpack type spray, at a coverage rate of 5-7m2/L. immediately after screeding. Curecon Double A should be re-applied each time the surface is broken (i.e. screed, bull float, troweling). Do not apply Curecon Double A to surfaces with excessive bleed.

    Clean Up:

    Clean all equipment with water prior to the coating drying. Use methylated spirit and turps, 50/50 if Curecon Double A has dried..


    stored in the original unopened containers in a cool dry place.


    Additional Information

    CODE 40-CCAA20
    4 Hour Delivery Yes
    Colour Blue
    U.O.M Each
    Brand Aftek
    Range / Model Curecon
    Size 20 L
    Appearance / Composition Liquid
    Yield Apply at 5 - 7 square metres per litre
    Follow Us