Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

GEOmasta HDPE Geomembrane Liner 5.8m x 50m

Code: HDPEL2
U.O.M. - Each

More Views

HDPE Liner made from high-density polyethylene. This versatile geomembrane solution is a cost effective and strong liner for dams, ponds, containment areas, tailing ponds and channels. Measures 5.8m wide x 50m long, 2mm thick.

Details

Due to its excellent chemical resistance and low material cost, HDPE is extremely popular in lining applications requiring low permeability and high strength/density ratio.

HDPE Liners are becoming more widely used as the implications of contaminated soil conditions on structures and the general environment. GEOmasta HDPE Liners are most commonly used in lining of channels, small dams and other containment structures.

HDPE is known for its large strength to density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The difference in strength exceeds the difference in density, giving HDPE a higher specific strength.

It is also harder and more opaque and can withstand somewhat higher temperatures (120°C/ 248°F for short periods).

Applications:

  • Channels
  • Small dams
  • Containment areas
  • Landfill liner & caps
  • Golf course Ponds
  • Pond and lake liners
  • Irrigation reservoirs
  • Waste water treatment
  • Mining tailing
  • Canal lining
  • Specifications

    Index Properties Units Standard HDPEL2
    Thickness Average mm ASTM D 5199 2.0
    Minimum Thickness ASTM D 5199 mm 1.8
    Density g/cm3 ASTM D 792 0.94
    Tensile Properties
    Yield Strength kN/m ASTM D 6693 29
    Break Strength kN/m ASTM D 6693 53
    Yield Elongation % ASTM D 6693 12
    Break Elongation % ASTM D 6693 700
    Tearing Resistance N ASTM D 10043 249
    Puncture Resistance N ASTM D 4833 640
    Stress Crack Resistance Hr ASTM D 5397 500
    Carbon Black Content % ASTM D 1603 2-3
    Carbon Black Dispersion Cat ASTM D 5596 9 in Categories 1 or 2 and 1 in Category 3
    Oxidative Induction Time Min ASTM D 3895 100min in standard OIT
    Oven Aging at 85 deg C
    Standard (90 days) % ASTM D 5721 55
    High Pressure (90 days) % ASTM D 3895 88
    UV Resistance (1600 hours) % ASTM D 5885 55
    *Specifications as per manufacturer

    Additional Information

    CODE HDPEL2
    10/4 - 4/10 Delivery Call To Confirm
    Brand GEOmasta
    Material High Density Polyethylene
    Length 50 m
    U.O.M Each
    Follow Us