Welcome to our online store!

Log In / Register My Quote
×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

ArmorZone Water Filled Crash Barrier, Red - MASH TL-1 and TL-2

Code: 15-MAZCB-R
U.O.M. - Each

More Views

ArmorZone water-filled road barrier 2160 mm x 870 mm x 450 mm. This Armorzone barrier is tested to MASH TL-1 and TL-2. Available in red.

NCHRP350 tested version also available from Jaybro.

ADDITIONAL FREIGHT CHARGES MAY APPLY - You may be contacted about freight cost for heavy, bulky or awkward items. Call us for details on 1300 885 364.

Details

Armor zone Road Barrier, 2m long water filled barrier made from 100% high density stabilised polyethylene (UV8). Ideal for creating a protective barrier around work sites, this barrier is designed for use on temporary worksites and also to protect workers engaging in roadside maintenance. This water filled temporary barrier is easy to transport and fast to deploy. Installation by two operators is effortless. Once filled, it creates a durable barricade .

The design allows for the barrier to be set up in a straight or curved configuration, with a radius as small as 28 meters if necessary.

These water filled barriers are installed using a galvanized steel pin connector. Once connected the barriers can be filled with up to 440 litres of water. However, when empty, they are very easy to manoeuvre, weighing just 56kg. A freight-friendly design helps to reduce shipping costs.

It provides up to 70kph work zone barrier protection. Additionally, the ArmorZone is tested and proven to assist with vehicle control, offering low deflection.

The Armorzone TL-2 Plastic Water Filled Barrier has been tested to meet the evaluation criteria of MASH TL-1 and TL-2 for a longitudinal barrier. Barriers must be filled with water to comply.

Features:

  • 2160 mm x 870 mm x 450 mm
  • Galvanized steel pin connector
  • Made from HD stabilised PE (UV8)
  • Weighs 56kg empty; 496kg full
  • Requires 440 litres of water to fill
  • Specifications:

  • MASH TL1 and MASH TL2 tested
  • Leading point of need 24m
  • Trailing point of need 26m
  • 2.1 metres deflection at 50km/hr
  • 4.1 metres deflection at 70km/hr
  • 50m minimum length in between terminals
  • Test Level 2 at 70km/hr = 2270kg
  • Additional Information

    CODE 15-MAZCB-R
    10/4 - 4/10 Delivery Call To Confirm
    Colour Red
    Length 2000 mm
    Height 870 mm
    Width 450 mm
    U.O.M Each
    Best for Worksites with design speeds up to 70 km/h (posted speed up to 60 km/h)
    MASH Test Level TL-1 & TL-2
    Approvals & Certifications Approved to Australian Standards
    Austroads Approved
    Module Connections Twin steel pin
    Weight When Empty 56kg
    Weight When Full 496kg
    Approved End Treatments and Crash Cushions The ArmorZone MASH barrier uses the same yellow end unit (not filled with water) as the ArmorZone barrier
    Follow Us